



AgiBot Robotics
AgiBot OmniHand 3 Tactile Dexterous Hand
Wired CAN-FD / RS485, no radio
Left, right or a matched pair
Pre-order: delivery date confirmed on your quote
Tax-exempt purchasing welcome with a valid certificate
The OmniHand 3 is the core hand of AgiBot's third-generation line, and the thing that sets it apart is that touch is standard rather than an upgrade. Every OmniHand 3 carries 268 tactile sensing points spread across the fingertips, the palm and the back of the hand, at 0.1 N (0.02 lbf) force sensing resolution. That is the feedback you need for grasp quality work, slip detection and safe contact with people, without stepping up to a flagship-priced hand.
Mechanically it is a 16 degree-of-freedom, five-finger hand, 10 active and 6 passive, that handles a 3 kg (6.6 lb) whole-hand payload with plus or minus 0.3 mm repeatability and opens or closes in 0.5 s. At 570 g (20.1 oz), it is light enough to hang off a humanoid wrist without eating the arm's payload budget, which is why it is the hand we recommend for the Unitree G1. It talks over wired CAN-FD or RS485, and AgiBot lists ROS 2, Python and C++ support for it.
Key Highlights
- Tactile sensing as standard: 268 one-dimensional force sensing points on the fingertips, palm and back of the hand, at 0.1 N (0.02 lbf) resolution.
- 16 degrees of freedom (10 active, 6 passive) in a human-hand-sized package.
- 3 kg (6.6 lb) whole-hand payload.
- Plus or minus 0.3 mm repeatability and a 0.5 s opening and closing response time.
- 570 g (20.1 oz), light enough for humanoid wrists.
- Unitree G1 compatible with a 3D-printed wrist adapter.
- Wired CAN-FD and RS485 communication, no radio, which simplifies integration and site approval.
- Developer support: AgiBot lists ROS 2, Python and C++ support. We confirm the SDK and firmware version for your unit on the quote.
- Teleoperation ready: pairs with the AgiBot OmniGlove data glove for demonstration capture and data collection.
AgiBot OmniHand 3 Specs
| Spec | Value |
|---|---|
| Degrees of freedom | 16 (10 active + 6 passive) |
| Whole-hand payload | 3 kg (6.6 lb) |
| Repeatability | Plus or minus 0.3 mm (0.012 in) |
| Opening and closing response time | 0.5 s |
| Weight | 570 g (20.1 oz) |
| Dimensions | 189 x 85 x 39 mm (7.4 x 3.3 x 1.5 in) |
| Tactile sensing | 268 points: fingertips, palm and back of hand |
| Force sensing type | 1D (normal force) |
| Force sensing resolution | 0.1 N (0.02 lbf) |
| Communication interface | CAN-FD / RS485 (wired) |
| Software | ROS 2, Python, C++ |
| Humanoid fit | Unitree G1 with 3D-printed wrist adapter |
Specifications from the official AgiBot OmniHand 3 product overview (October 2026). Some older web listings show 510 g and 5 kg; those figures are outdated. Subject to change at final delivery.
No radio, no FCC grant required. The OmniHand 3 communicates over wired CAN-FD or RS485. There is no Wi-Fi, Bluetooth or cellular module in the hand, so the FCC equipment authorization rules that apply to mobile robots do not apply here.
Built For
- Unitree G1 owners who want five-finger dexterity with touch feedback
- Humanoid robots and arms running ROS 2, Python or C++ control stacks
- Embodied AI teams collecting tactile manipulation data
- Teleoperation and demonstration capture with the AgiBot OmniGlove
- Grasping, slip detection and human-robot interaction research
- Robotic arm integrators who need a light, wired dexterous end effector
Good to Know
- Prices are per hand. A matched left and right pair is $13,998.
- This is a pre-order. The hand ships from AgiBot, and we confirm the delivery date in writing on your quote before we take payment.
- G1 mounting needs a 3D-printed wrist adapter. Tell us your robot and we confirm the interface before quoting.
- Payload is 3 kg (6.6 lb) for the whole hand. If you need more lift or direct-drive joint sensing, look at the OmniHand 3 Ultra-M.
- Tactile sensing is one-dimensional (normal force). If your research needs three-axis fingertip force, look at the Ultra-M's vision-based tactile sensing.
- Warranty is AgiBot's standard 6 months for OmniHand products, with service coordinated through us.
How Purchasing Works
Tell us the side, the quantity of hands and which robot or arm they are mounting to, and we return a formal written quote, typically the same or next business day. The delivery date is confirmed in writing on your quote. We work with universities, research institutions and enterprise buyers, and we accept tax-exempt purchasing with a valid certificate on file.
Frequently Asked Questions
How much does the AgiBot OmniHand 3 cost?
$6,999 per hand. A matched left and right pair is $13,998.
Does the OmniHand 3 work with the Unitree G1?
Yes. It mounts to the G1 with a 3D-printed wrist adapter. At 570 g it is one of the lighter tactile hands for a humanoid wrist.
How much can it hold?
The whole-hand payload is 3 kg (6.6 lb).
What tactile sensing does it have?
268 one-dimensional tactile sensing points across the fingertips, palm and back of the hand, at 0.1 N force sensing resolution. Tactile sensing is standard on every OmniHand 3.
How is it different from the original OmniHand?
The OmniHand 3 is the third-generation hand with tactile sensing built in on every unit. The original AgiBot OmniHand is the earlier generation, sold with or without a tactile option.
How does it communicate?
Wired CAN-FD or RS485. AgiBot lists ROS 2, Python and C++ support, and we confirm the SDK and firmware version for your unit on the quote.
Does it need FCC authorization?
No. The hand has no radio, so the equipment authorization rules for radio devices do not apply to it.
Can I teleoperate the OmniHand 3?
Yes. The AgiBot OmniGlove data glove tracks your hand and drives the OmniHand 3 in real time. It is sold as a pair from $7,499.
When does it ship?
It is a pre-order shipped from AgiBot. The delivery date is confirmed in writing on your quote, before we take payment.
Compare Robot Hands and Grippers
Choosing between hands? See every model side by side in Robotic Hands & Grippers, read the robot hands and grippers buyer's guide, or step up to the OmniHand 3 Ultra-M.
Explore the AgiBot Lineup
Compare the third-generation line with the OmniHand 3 Lite-S and the OmniHand 3 Ultra-M, read the robot hands and grippers buyer's guide, or browse the full AgiBot hands and grippers collection.

Degrees of freedom

Tactile sensing

Whole-hand payload

Weight per hand

Fits with wrist adapter
Pairs well with
Questions about configuration, lead time or deployment? We reply within one business day.
-
Shipping and Delivery
Robots ship freight and insured to your dock or venue. Freight is quoted to your destination address and appears as a line item on your written quote. Lead time is confirmed in writing before you commit to a delivery date.
-
Support
You deal with Global Drone HQ directly, before and after the sale. We help you pick the right configuration, handle delivery and coordinate anything that needs the factory rather than handing you an address overseas.
-
Warranty and Service
AgiBot is responsible for complete-machine warranty service, including repair or replacement of core components, software debugging and upgrades, and complex repairs that cannot be resolved through remote guidance. Units are sourced through AgiBot's US master distributor.
-
Contact Us
Email daniel@globaldronehq.com or call (855) 906-5185. Tax-exempt purchasing is welcome for schools, universities and public agencies.
Touch on every surface that matters.
Every OmniHand 3 carries 268 tactile sensing points across the fingertips, palm and back of the hand, reading force at 0.1 N (0.02 lbf) resolution. That is what lets a robot hand a person an object, pick up something fragile, or learn a grasp from contact instead of guessing. AgiBot's product film shows the hand at work on an X2 humanoid.
The general-purpose hand in AgiBot's third generation
AgiBot positions the OmniHand 3 for service interaction, research and education, and light manipulation: a tactile hand light enough for a humanoid wrist and priced to deploy in pairs.
Specifications from AgiBot's official OmniHand 3 product overview, 29 October 2026.
16 Degrees of Freedom • 268 Tactile Points • 0.5 s Open and Close • 570 g • Fits the Unitree G1
Three kinds of work AgiBot designed it for
The OmniHand 3 covers common gestures and a full range of grasp types, so one hand handles interaction and manipulation.

Gestures and touch
Gesture interaction, rock-paper-scissors and touch interaction. The back of the hand is touch-sensitive too, so a tap or a handshake registers.

Mobile manipulation and training
A tactile platform for mobile manipulation projects and algorithm training, with force data from 268 points to learn from.

Grasp, carry, hand over
Grasping everyday items and delivering documents, with a 3 kg (6.6 lb) whole-hand payload and ±0.3 mm repeatability.
Scenarios and photos from AgiBot's official OmniHand 3 product overview.
What it mounts to and how it connects
AgiBot builds the OmniHand 3 for fast integration on mainstream humanoid and collaborative robots and mobile manipulation platforms.
Robots and mounting
- Unitree G1: mounts with a 3D-printed wrist adapter.
- Other humanoids, cobots and mobile manipulators: AgiBot lists the hand as compatible with mainstream platforms. Send us your model and we confirm the wrist interface.
- Sides: sold as a left hand, a right hand or a matched pair.
- Teleoperation: the AgiBot OmniGlove drives the OmniHand 3 from your own hand.
Connection and software
- Interfaces: wired CAN-FD and RS485. There is no radio in the hand.
- Languages: ROS 2, Python and C++ per AgiBot's product line card.
- Touch data: 1D force from the fingertips, palm and back of the hand at 0.1 N resolution.
- Warranty: AgiBot's standard 6 months for OmniHand products.
Tell us your platform and we confirm the hardware revision, SDK version and mounting before you order.
OmniHand 3 next to the rest of the line
Three hands, one generation. Step down for a small robot or a tight budget, step up for direct-drive joints and vision-based touch.
| OmniHand 3 Lite-S | OmniHand 3 | OmniHand 3 Ultra-M | |
|---|---|---|---|
| Role | Lightweight hand for small robots | General-purpose tactile hand | Direct-drive research flagship |
| Degrees of freedom | 4 active + 7 passive | 10 active + 6 passive | 20 active |
| Weight | 350 g (12.3 oz) | 570 g (20.1 oz) | 630 g (22.2 oz) |
| Payload | 1 kg (2.2 lb) max | 3 kg (6.6 lb) whole hand | 3 kg (6.6 lb) stable, 8 kg (17.6 lb) lift |
| Open and close | 0.5 s | 0.5 s | 0.3 s typical |
| Repeatability | ±0.5 mm | ±0.3 mm | ±0.2 mm |
| Touch sensing | Optional 1D module, 0.1 N | 268 points, 1D force, 0.1 N | Vision-based fingertips at 0.005 N, 3D palm sensor with 300 points |
| Interface | CAN-FD / RS485 | CAN-FD / RS485 | CAN-FD / RS485 / EtherCAT |
| Glove teleoperation | Yes | Yes | Yes |
| Price per hand | $899 | $6,999 | $23,999 |
Figures from AgiBot's official product overviews (29 October 2026) and the OmniHand 3 Ultra-M datasheet. Subject to change at final delivery.
Dig Deeper
Sensing in Detail
- 268 tactile sensing points spread across the fingertips, the palm and the back of the hand.
- One-dimensional force sensing at 0.1 N (0.02 lbf) resolution. If you need 3D force vectors at the fingertip, that is the OmniHand 3 Ultra-M.
- Back-of-hand touch is unusual in this class and covers contact-based interaction such as a tap or a handshake.
- Safer contact: AgiBot describes the distributed sensing as built for safer, more compliant interaction with people and objects.
Motion and Mechanics
- 16 degrees of freedom: 10 active and 6 passive, covering common gestures and a comprehensive set of grasp types.
- 0.5 s opening and closing response time.
- 3 kg (6.6 lb) whole-hand payload.
- ±0.3 mm repeatability.
- 570 g (20.1 oz) and 189 x 85 x 39 mm (7.4 x 3.3 x 1.5 in), close to a human hand.
Ordering and Delivery
- Priced per hand: $6,999, or $13,998 for a matched left and right pair.
- Pre-order: the hand ships from AgiBot. We confirm the delivery date in writing on your quote before we take payment.
- Tell us the robot: we confirm the wrist interface and adapter before quoting.
- Warranty: AgiBot's standard 6 months for OmniHand products, with service coordinated through us. Rubber contact parts are treated as consumables.
Add teleoperation, or pick a different hand
Order hands and glove on one quote.
Teleoperation gloveOmniGloveWear it and the hand mirrors you. Records 21 joint angles per hand for training data.From $7,499 per pair
Entry handOmniHand 3 Lite-S350 g five-finger hand for small humanoids and compact service robots.$899 per hand
Flagship handOmniHand 3 Ultra-M20 active DoF, direct drive, vision-based fingertip tactile sensing.$23,999 per handCompare every model in Robotic Hands & Grippers, read the robot hands and grippers buyer's guide, or browse AgiBot hands and grippers.
FAQs
How much does the AgiBot OmniHand 3 cost?
$6,999 per hand, or $13,998 for a matched left and right pair.
Does the OmniHand 3 work with the Unitree G1?
Yes. It mounts to the G1 with a 3D-printed wrist adapter. Tell us your G1 configuration and we confirm the fit before you order.
What tactile sensing does it have?
268 sensing points across the fingertips, palm and back of the hand, reading one-dimensional force at 0.1 N resolution. Tactile sensing is standard on every OmniHand 3.
How fast does it open and close?
The opening and closing response time is 0.5 seconds.
Can I teleoperate it?
Yes. The AgiBot OmniGlove data glove tracks your hand and drives the OmniHand 3 in real time. It is sold as a pair from $7,499.
How is it different from the Lite-S and the Ultra-M?
The Lite-S is a 350 g hand for small robots at $899. The Ultra-M is the direct-drive research flagship with 20 active joints and vision-based fingertip sensing at $23,999. The OmniHand 3 sits between them as the general-purpose tactile hand.
