Load video: AgiBot OmniGlove data glove on a hand, flexing fingersLoad video: AgiBot OmniGlove data glove on a hand, flexing fingers

Your hand moves. The robot hand follows.

The OmniGlove reads 21 joint angles from your hand with 6 electromagnetic sensors and 7 inertial units, then drives an AgiBot OmniHand 3 in real time with 10 ms motion-to-data latency. Every movement is recorded, so one session gives you both a working demo and training data.

How it works

From your hand to a robot hand in three steps

No motion-capture studio and no separate tracking stack. The glove, the app and the robot hand come from one vendor and are built to work together.

1

Put it on and calibrate

Plug in over USB, open the Windows app and run the guided calibration.

10 to 15 sCalibration time
2

Teleoperate

Your wrist and fingers are solved in one kinematic chain and mapped to an OmniHand 3 as you move.

10 msMotion-to-data latency
3

Record and replay

Capture every session as joint angles, keypoints and fingertip poses, then replay it or use it as training data.

21 jointsTracked per hand, 1 mm typical accuracy

6 EMF + 7 IMU Tracking • 1 mm Accuracy • 10 ms Latency • 746 Tactile Points on Pro • Sold as a Pair

Built for

Three ways teams use it

From driving a single robot hand to recording a dataset.

AgiBot OmniGlove teleoperating a dexterous robot hand that mirrors the wearer
Teleoperation

Drive a dexterous hand

Wrist and fingers are solved in one kinematic chain and mapped to the OmniHand 3, OmniHand 3 Lite or OmniHand 3 Ultra.

AgiBot OmniGlove data glove back view with tracking module
Data collection

Record hand motion for training

Captures 21 joint angles, 21 keypoints and 5 fingertip poses per hand, with EMF and tactile output at 125 Hz and IMU output at 1000 Hz.

AgiBot OmniGlove Pro tactile force data shown in the host software
Tactile research (Pro)

Measure contact, not just motion

The Pro's 746 points per hand are strictly time-aligned with the pose data, so force and motion line up in every recording.

Scenarios and photos from AgiBot's official OmniGlove product overview. There is no public SDK for the glove; it runs through AgiBot's Windows host app.

Two versions

OmniGlove or OmniGlove Pro?

Both track your hand and drive a robot hand. The Pro also records what your palm and fingers feel.

Motion capture

OmniGlove

$7,499 per pair

  • 6 EMF + 7 IMU fusion tracking
  • 21 joint angles, 21 keypoints, 5 fingertip poses
  • Calibrate, record, replay and teleoperate in one app
  • Drives the OmniHand 3, 3 Lite and 3 Ultra
  • No tactile sensing
Request a Quote
Motion capture + touch

OmniGlove Pro

$9,999 per pair

  • Everything in the OmniGlove
  • 746 tactile points per hand across 17 zones
  • 0 to 20 N range at 0.1 N resolution
  • Under 3 mm spatial resolution
  • Tactile and pose data aligned in time
Request a Quote

Dig Deeper

What It Does
  • Teleoperation: wear the glove and an OmniHand 3 mirrors your hand in real time.
  • Data collection: records 21 joint angles, 21 keypoints and 5 fingertip poses per hand for imitation learning and embodied AI training.
  • One app for the whole workflow: the Windows host app handles visualization, calibration, recording, playback and teleoperation.
  • Stable tracking: 6 EMF sensors fused with 7 IMUs, with built-in magnetic-interference rejection for work near metal, electronics and a second glove.
OmniGlove vs OmniGlove Pro
  • OmniGlove, $7,499 per pair: motion capture and teleoperation. Choose it for dexterous-hand teleoperation and hand-motion data.
  • OmniGlove Pro, $9,999 per pair: everything in the OmniGlove plus whole-palm tactile sensing, 746 points per hand across 17 zones, 0 to 20 N range at 0.1 N resolution.
  • Tactile and pose data are aligned in time on the Pro, so contact and motion line up in your dataset.
  • Choose Pro for contact-rich data collection, tactile research and human-robot interaction experiments.
Setup and Compatibility
  • Works with: AgiBot OmniHand 3, OmniHand 3 Lite and OmniHand 3 Ultra. It is not specified for the older 2025 OmniHand.
  • Calibration: 10 to 15 seconds.
  • Connection: USB, 5 V wired power. No wireless link and no battery.
  • Computer: Windows PC for the host app.
  • Size: M today. A size L has been announced.
  • Weight: 150 g or less (5.3 oz) including cable.

FAQs

How much does the AgiBot OmniGlove cost?

$7,499 for a pair of OmniGloves, or $9,999 for a pair of OmniGlove Pro with whole-palm tactile sensing.

Which robot hands does it work with?

The AgiBot OmniHand 3, OmniHand 3 Lite and OmniHand 3 Ultra. Tell us which hand you have and we confirm compatibility before you order.

What does the Pro version add?

Whole-palm tactile sensing: 746 points per hand across 17 zones, 0 to 20 N at 0.1 N resolution, time-aligned with the pose data.

Is it wireless?

No. The glove connects and is powered over USB, so there is no battery to charge and no wireless link to drop.

Is it sold as one glove or a pair?

Both versions are sold as a pair, left and right.

When does it ship?

It is a pre-order item. We confirm the delivery date in writing on your quote before we take payment.

Request a Quote

AgiBot OmniGlove Teleoperation Data Glove

Tell us a bit about your project and we'll get back to you within one business day with a custom quote.