Scaffolding costs thousands and takes days to erect. Rope-access crews carry high insurance premiums and safety liability. Boom lifts can't reach every angle. The ABZ Innovation C10 eliminates all three: it puts 2,900 PSI of cleaning pressure at heights up to 197 feet in under an hour, with no one off the ground.

Built on ABZ's proven M12 industrial platform and manufactured to CE, ISO, and FCC standards at ABZ's Hungarian facility, the C10 is engineered from the ground up for commercial cleaning — not a modified agricultural drone or consumer platform with accessories bolted on.

Specifications

What the C10 Cleans

Building Facades and Exterior Walls

The C10's RTK positioning holds a precise standoff distance from the building surface while radar obstacle avoidance navigates ledges, window frames, HVAC units, and architectural features automatically. Concrete, brick, cladding, and composite panels all cleaned without scaffolding or boom lifts. Jobs that require multi-day scaffolding setups are completed in hours.

Windows and Glass Facades

Adjustable pressure lets the C10 dial down to under 80 bar for glass surfaces — gentle enough for curtain-wall glazing, strong enough to remove grime and biological film. RTK precision maintains consistent standoff distance, preventing contact with the glass. Pair with a deionized water supply for streak-free results on high-value commercial facades.

Solar Panels

Solar panel soiling costs installations 15–25% of annual energy output. The C10 covers large rooftop and ground-mount arrays systematically, with adjustable pressure suitable for delicate panel surfaces and 15 L/min flow for efficient coverage. No workers walking on panels, no slip hazard, no panel damage from foot traffic.

Wind Turbine Blades

At 60 meters of reach and 200 bar of pressure with 10 m/s wind resistance, the C10 handles blade cleaning at exposed turbine sites — without rope-access technicians suspended from the hub. Leading-edge contamination removal extends blade life and restores energy output.

Industrial Structures: Silos, Tanks, and Bridges

Heavy biological fouling, mineral deposits, and industrial contamination on silos, cooling towers, and tanks require high pressure to remove effectively. The C10 accesses curved and irregular surfaces that boom lifts can't safely reach, and eliminates the need for confined-space entry in tank cleaning scenarios.

Monuments and Heritage Buildings

Pressure fully adjustable from low to 200 bar means the C10 is suitable for delicate historic stonework and terracotta facades. Centimeter-level RTK precision keeps the cleaning head at a consistent, safe distance from irreplaceable surfaces — with none of the contact risk of scaffolding erected directly against historic structures.

Why the Tethered Hose Setup Matters

The C10 uses a tethered high-pressure hose connected to a ground-based pump (Karcher HD 7/20 G Classic or equivalent). This is the professional standard for cleaning drones — and here's why it's better than onboard tanks:

• Unlimited water supply — the drone never lands to refill mid-job
• Consistent pressure throughout — the ground pump handles pressure generation, not the drone's battery
• Battery dedicated to flight — with 12-min flight time and 11-min charge, a 4-battery rotation keeps the C10 in the air nearly continuously all day
• Lower operating cost — no consumable tank refills, no downtime for water pickup

Drone Only vs. Ready to Fly Kit

Frequently Asked Questions

What ground equipment do I need alongside the C10?

You need a high-pressure pump (the Karcher HD 7/20 G Classic is the recommended pairing), a high-pressure hose rated for 200+ bar and at least 60m in length, and a water source (mains connection or ground tank). For window and glass facade work, a pure water or deionized water system is recommended to prevent streaking. A van or truck for transport rounds out a professional setup.

Do I need a license to operate the C10 commercially?

Yes. In the United States, any commercial drone operation requires an FAA Part 107 Remote Pilot Certificate. The C10's CE, ISO, and FCC certifications cover the aircraft itself for US and EU operations. You'll also need to register the aircraft with the FAA (required for drones over 0.55 lbs) and carry commercial drone liability insurance — most clients require a certificate of insurance before allowing operations on their property.

Can the C10 operate on glass and delicate surfaces?

Yes. The pressure is fully adjustable from low settings suitable for glass and heritage stonework all the way up to 200 bar for industrial concrete and heavy fouling. The RTK positioning and radar obstacle avoidance work together to maintain a precise, safe standoff distance from delicate surfaces throughout the cleaning pass.

How long does the battery last and how quickly does it recharge?

The C10 delivers up to 12 minutes of flight time with its cleaning payload. Battery recharge time is 11 minutes minimum. The Ready to Fly Kit's 4-battery configuration enables near-continuous operation: while one battery is in the drone, another is on the charger, so downtime between flights is minimal throughout a full workday.

What certifications does the C10 hold?

The ABZ Innovation C10 is CE, ISO, and FCC certified. It is assembled and tested at ABZ Innovation's facility in Hungary and comes with a 1-year warranty and professional aftersales support.

Is this suitable for starting a drone cleaning business?

Yes — the C10 is the platform professional cleaning drone operators build their businesses on. Industry data from established operators shows average commercial job revenue of $14,000+, with equipment ROI typically recovered within 6 months of active operations. See our complete drone cleaning business startup guide for step-by-step instructions on licensing, pricing, finding clients, and revenue projections.